Wiring and Accessories
I nstallation   is   fast   and   easy   with   our   Wiring   and Accessories.   The   Custom Aluminum   Channel   not   only   contains   the   L.E.D.   strip   lighting,   it   has   a profile   designed   as   a   guide   for   the   connector   system.   Each   piece   (except   our   Outdoor   Location   products)   has   a   male   connector   on   one   or   both ends. The mating female connector uses the guide to ensure perfect alignment for a quick reliable connection every time.
Legend
C.S.A.   and   U.L.   approved   Class   2   Power   Supplies. A   Class   2   Power   Supply   is   limited   to   less   than   100VA   and   a   maximum   output   voltage   of   30V or   less.   This   limits   the   power   levels   to   be   considered   safe   enough   to   receive   special   consideration   in   safety   requirement   compliance.   There   is   no inspection required for Class 2 devices that use an approved power supply, and they can be installed by anybody. JB6PJ   Mini   Junction   box.   The   JB6PJ   is   used   where   the   circuit   is   a   simple   ON/OFF   design   or   in   circuits   where   the   Dimming   control   is   external. The   JB6PJ   features   a   5mm   Power   Input   Connector   and   has   two   6   position   terminal   blocks   for   Output   Connections.   This   is   an   ideal   solution   for In-Cabinet, Under-Cabinet, Back-Splash and Toe_Kick applications. ST-22   Series   of   Stub   Connectors   have   one   Female   Connector   attached   to   one   end   and   unterminated   wires   on   the   other.   These   are   used   for   a number   of   applications   that   include   connecting   to   the   JB6PJ   Mini   Junction   Box,   Dimmer   Drivers   and   Colour   Temperature   Drivers   as   well   as   Stub Connections   transitioning   from   In-Cabinet/Under-Cabinet   to   Interior   Wall   wiring.   They   are   available   in   2,   3,   and   4   wire   22AWG   Jacketed configurations for Single Colour, Colour Temperature Control and RGB applications respectively. Available lengths from 24” to 60”. LK-22   Series   Link   Wires   have   one   Female   Connector   on   each   end.   These   are   used   to   Link   one   section   to   the   next   when   there   is   a   distance   that would   make   single   wires   unmanageable.   They   are   available   in   2,   3,   and   4   wire   22AWG   Jacketed   configurations   for   Single   Colour,   Colour Temperature Control and RGB applications respectively. Available lengths from 4” to 60”. JW-22-90   Series   Jumper   Wires   have   one   Female   Connector   on   both   ends   and   are   designed   to   make   90   Degree   Turns.   These   are   used   to   to Jumper   one   section   to   the   next   in   Inter-Cabinet   applications   where   the   sections   will   be   close   together.   These   are   available   in   2   or   4   wire   22AWG Non-Jacketed   configurations.   These   Jumper      Wires   ARE   NOT   POLARIZED   to   avoid   confusion   over   Left   and   Right      turn   ordering   terminology. Ensure   that   your   L.E.D.   Channel   in   installed   in   a   manner   that   all   Connections   are   in   correct   alignment.   If   there   is   a   conflict   in   the   Channel installation, simply turn one end 180 degrees. Available lengths from 2” to 8”. JW-22   Series   Jumper   Wires   have   one   Female   Connector   on   both   ends.   These   are   typically   used   when   installing   Long   Run   L.E.D.   Channel installations   where   the   overall   length   exceeds   120”.   They   are   available   in   2,   3,   and   4   wire   22AWG   Non-Jacketed   configurations   for   Single Colour, Colour Temperature Control and RGB applications respectively. Available lengths from 2” to 8”.
1).
2).
3).
4).
5).
6).
Click on an image to enlarge.
PS12V3A
PS12V6A
MW12V5AIP67
JB6PJ
A Complete List of Part Numbers Below
Controller Driver Controller Driver Controller Driver Controller Remote Controller Remote Lighting Products Power Supply Power Supply Power Supply Power Supply Power Supply Power Supply Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories
CD-01 CD-02 CD-04 CR-CCT CR-RGBW IG3W PS12V3A PS12V6A PS12V3A-D PS12V5A-D PS12V8A-D MW12V5AIP67 DS-1 JB6PJ JW22-2 JW22-2-90 JW22-3 JW22-4 JW22-4-90 LK22-2 LK22-3 LK22-4 ST22-2 ST22-3 ST22-4
Dimmer Driver WW/CW Driver CCT RGBW Driver Universal Remote RGBW Remote In Ground Light 3W 60 12V@3A Indoor Class2 12V@6A Indoor Class2 12V@3A Indoor Dimmable 12V@5A Indoor Dimmable 12V@8A Indoor Dimmable 12V@5A Outdoor IP67 Class2 Magnetic Door Switch Junction Box 6 ckt /w Jack Joining Wire 2 X 22AWG Joining Wire 2 X 22AWG 90 Joining Wire 3 X 22AWG Joining Wire 4 X 22AWG Joining Wire 4 X 22AWG  90 Link Wire 2 X 22AWG Link Wire 3 X 22AWG Link Wire 4 X 22AWG Stub Wire 2 X 22AWG Stub Wire 3 X 22AWG Stub Wire 4 X 22AWG

960

Taylor Electric Light Company
Taylor Electric Light Company
Wiring and Accessories
I nstallation   is   fast   and   easy   with   our   Wiring   and   Accessories.   The   Custom Aluminum   Channel   not   only   contains   the   L.E.D.   strip   lighting,   it   has   a   profile designed    as    a    guide    for    the    connector    system.    Each    piece    (except    our Outdoor   Location   products)   has   a   male   connector   on   one   or   both   ends.   The mating   female   connector   uses   the   guide   to   ensure   perfect   alignment   for   a quick reliable connection every time.
Legend
   C.S.A.   and   U.L.   approved   Class   2   Power   Supplies. A   Class   2   Power   Supply   is limited   to   less   than   100VA   and   a   maximum   output   voltage   of   30V   or   less.   This limits    the    power    levels    to    be    considered    safe    enough    to    receive    special consideration    in    safety    requirement    compliance.    There    is    no    inspection required   for   Class   2   devices   that   use   an   approved   power   supply,   and   they   can be installed by anybody. JB6PJ   Mini   Junction   box.   The   JB6PJ   is   used   where   the   circuit   is   a   simple ON/OFF   design   or   in   circuits   where   the   Dimming   control   is   external.   The JB6PJ   features   a   5mm   Power   Input   Connector   and   has   two   6   position   terminal blocks   for   Output   Connections.   This   is   an   ideal   solution   for   In-Cabinet,   Under- Cabinet, Back-Splash and Toe_Kick applications. ST-22   Series   of   Stub   Connectors   have   one   Female   Connector   attached   to   one end   and   unterminated   wires   on   the   other.   These   are   used   for   a   number   of applications   that   include   connecting   to   the   JB6PJ   Mini   Junction   Box,   Dimmer Drivers    and    Colour    Temperature    Drivers    as    well    as    Stub    Connections transitioning   from   In-Cabinet/Under-Cabinet   to   Interior   Wall   wiring.   They   are available   in   2,   3,   and   4   wire   22AWG   Jacketed   configurations   for   Single   Colour, Colour    Temperature    Control    and    RGB    applications    respectively.    Available lengths from 24” to 60”. LK-22   Series   Link   Wires   have   one   Female   Connector   on   each   end.   These   are used   to   Link   one   section   to   the   next   when   there   is   a   distance   that   would   make single   wires   unmanageable.   They   are   available   in   2,   3,   and   4   wire   22AWG Jacketed   configurations   for   Single   Colour,   Colour   Temperature   Control   and RGB applications respectively. Available lengths from 4” to 60”. JW-22-90   Series   Jumper   Wires   have   one   Female   Connector   on   both   ends   and are   designed   to   make   90   Degree   Turns.   These   are   used   to   to   Jumper   one section   to   the   next   in   Inter-Cabinet   applications   where   the   sections   will   be close    together.    These    are    available    in    2    or    4    wire    22AWG    Non-Jacketed configurations.    These    Jumper        Wires    ARE    NOT    POLARIZED    to    avoid confusion   over   Left   and   Right      turn   ordering   terminology.   Ensure   that   your L.E.D.   Channel   in   installed   in   a   manner   that   all   Connections   are   in   correct alignment.   If   there   is   a   conflict   in   the   Channel   installation,   simply   turn   one   end 180 degrees. Available lengths from 2” to 8”. 6). JW-22   Series   Jumper   Wires   have   one   Female   Connector   on   both   ends.   These are   typically   used   when   installing   Long   Run   L.E.D.   Channel   installations   where the   overall   length   exceeds   120”.   They   are   available   in   2,   3,   and   4   wire   22AWG Non-Jacketed   configurations   for   Single   Colour,   Colour   Temperature   Control and RGB applications respectively. Available lengths from 2” to 8”.
1).
2).
3).
4).
5).
Click on an image to enlarge.
PS12V3A
PS12V6A
MW12V5AIP67
JB6PJ
A Complete List of Part Numbers Below
CD-01 CD-02 CD-04 CR-CCT CR-RGBW IG3W PS12V3A PS12V6A PS12V3A-D PS12V5A-D PS12V8A-D MW12V5AIP67 DS-1 JB6PJ JW22-2 JW22-2-90 JW22-3 JW22-4 JW22-4-90 LK22-2 LK22-3 LK22-4 ST22-2 ST22-3 ST22-4
Dimmer Driver WW/CW Driver CCT RGBW Driver Universal Remote RGBW Remote In Ground Light 3W 60 12V@3A Indoor Class2 12V@6A Indoor Class2 12V@3A Indoor Dimmable 12V@5A Indoor Dimmable 12V@8A Indoor Dimmable 12V@5A Outdoor IP67 Class2 Magnetic Door Switch Junction Box 6 ckt /w Jack Joining Wire 2 X 22AWG Joining Wire 2 X 22AWG 90 Joining Wire 3 X 22AWG Joining Wire 4 X 22AWG Joining Wire 4 X 22AWG  90 Link Wire 2 X 22AWG Link Wire 3 X 22AWG Link Wire 4 X 22AWG Stub Wire 2 X 22AWG Stub Wire 3 X 22AWG Stub Wire 4 X 22AWG
Wiring Accessories
_
_
_
Taylor Electric Light Company
Wiring and Accessories
I nstallation   is   fast   and   easy   with   our   Wiring and    Accessories.    The    Custom    Aluminum Channel   not   only   contains   the   L.E.D.   strip lighting,   it   has   a   profile   designed   as   a   guide for     the     connector     system.     Each     piece (except   our   Outdoor   Location   products)   has a   male   connector   on   one   or   both   ends.   The mating   female   connector   uses   the   guide   to ensure   perfect   alignment   for   a   quick   reliable connection every time.
Legend
C.S.A.    and    U.L.    approved    Class    2    Power Supplies.   A   Class   2   Power   Supply   is   limited to   less   than   100VA   and   a   maximum   output voltage   of   30V   or   less.   This   limits   the   power levels    to    be    considered    safe    enough    to receive     special     consideration     in     safety requirement      compliance.      There      is      no inspection   required   for   Class   2   devices   that use    an    approved    power    supply,    and    they can be installed by anybody. JB6PJ   Mini   Junction   box.   The   JB6PJ   is   used where   the   circuit   is   a   simple   ON/OFF   design or   in   circuits   where   the   Dimming   control   is external.   The   JB6PJ   features   a   5mm   Power Input    Connector    and    has    two    6    position terminal   blocks   for   Output   Connections.   This is   an   ideal   solution   for   In-Cabinet,   Under- Cabinet,       Back-Splash       and       Toe_Kick applications. ST-22   Series   of   Stub   Connectors   have   one Female   Connector   attached   to   one   end   and unterminated   wires   on   the   other.   These   are used    for    a    number    of    applications    that include     connecting     to     the     JB6PJ     Mini Junction    Box,    Dimmer    Drivers    and    Colour Temperature     Drivers     as     well     as     Stub Connections        transitioning        from        In- Cabinet/Under-Cabinet      to      Interior      Wall wiring.   They   are   available   in   2,   3,   and   4   wire 22AWG   Jacketed   configurations   for   Single Colour,    Colour    Temperature    Control    and RGB     applications     respectively.     Available lengths from 24” to 60”. LK-22   Series   Link   Wires   have   one   Female Connector   on   each   end.   These   are   used   to Link   one   section   to   the   next   when   there   is   a distance     that     would     make     single     wires unmanageable.   They   are   available   in   2,   3, and   4   wire   22AWG   Jacketed   configurations for     Single     Colour,     Colour     Temperature Control   and   RGB   applications   respectively. Available lengths from 4” to 60”. JW-22-90    Series    Jumper    Wires    have    one Female    Connector    on    both    ends    and    are designed   to   make   90   Degree   Turns.   These are   used   to   to   Jumper   one   section   to   the next   in   Inter-Cabinet   applications   where   the sections   will   be   close   together.   These   are available    in    2    or    4    wire    22AWG    Non- Jacketed     configurations.     These     Jumper       Wires    ARE     NOT     POLARIZED     to     avoid confusion   over   Left   and   Right      turn   ordering terminology.      Ensure      that      your      L.E.D. Channel    in    installed    in    a    manner    that    all Connections    are    in    correct    alignment.    If there   is   a   conflict   in   the   Channel   installation, simply   turn   one   end   180   degrees.   Available lengths from 2” to 8”. 6). JW-22     Series     Jumper     Wires     have     one Female   Connector   on   both   ends.   These   are typically    used    when    installing    Long    Run L.E.D.     Channel     installations     where     the overall     length     exceeds     120”.     They     are available   in   2,   3,   and   4   wire   22AWG   Non- Jacketed    configurations    for    Single    Colour, Colour     Temperature     Control     and     RGB applications    respectively.    Available    lengths from 2” to 8”.
1).
2).
3).
4).
5).
Click on an image to enlarge.
PS12V3A
PS12V6A
MW12V5AIP67
JB6PJ
A Complete List of Part Numbers Below
CD-01 CD-02 CD-04 CR-CCT CR-RGBW IG3W PS12V3A PS12V6A PS12V3A-D PS12V5A-D PS12V8A-D MW12V5AIP67 DS-1 JB6PJ JW22-2 JW22-2-90 JW22-3 JW22-4 JW22-4-90 LK22-2 LK22-3 LK22-4 ST22-2 ST22-3 ST22-4
Wiring Accessories
Dimmer Driver WW/CW Driver CCT RGBW Driver Universal Remote RGBW Remote In Ground Light 3W 60 12V@3A Indoor Class2 12V@6A Indoor Class2 12V@3A Indoor Dimmable 12V@5A Indoor Dimmable 12V@8A Indoor Dimmable 12V@5A Outdoor IP67 Cla Magnetic Door Switch Junction Box 6 ckt /w Jack Joining Wire 2 X 22AWG Joining Wire 2 X 22AWG 90 Joining Wire 3 X 22AWG Joining Wire 4 X 22AWG Joining Wire 4 X 22AWG 90 Link Wire 2 X 22AWG Link Wire 3 X 22AWG Link Wire 4 X 22AWG Stub Wire 2 X 22AWG Stub Wire 3 X 22AWG Stub Wire 4 X 22AWG
_
_
_
Wiring and Accessories
I nstallation   is   fast   and   easy   with   our   Wiring   and   Accessories.   The   Custom   Aluminum   Channel   not   only contains   the   L.E.D.   strip   lighting,   it   has   a   profile   designed   as   a   guide   for   the   connector   system.   Each   piece (except   our   Outdoor   Location   products)   has   a   male   connector   on   one   or   both   ends.   The   mating   female connector uses the guide to ensure perfect alignment for a quick reliable connection every time.
Legend
C.S.A.   and   U.L.   approved   Class   2   Power   Supplies.   A   Class   2   Power   Supply   is   limited   to   less   than   100VA and   a   maximum   output   voltage   of   30V   or   less.   This   limits   the   power   levels   to   be   considered   safe   enough   to receive   special   consideration   in   safety   requirement   compliance.   There   is   no   inspection   required   for   Class   2 devices that use an approved power supply, and they can be installed by anybody. JB6PJ   Mini   Junction   box.   The   JB6PJ   is   used   where   the   circuit   is   a   simple   ON/OFF   design   or   in   circuits where   the   Dimming   control   is   external.   The   JB6PJ   features   a   5mm   Power   Input   Connector   and   has   two   6 position   terminal   blocks   for   Output   Connections.   This   is   an   ideal   solution   for   In-Cabinet,   Under-Cabinet, Back-Splash and Toe_Kick applications. ST-22   Series   of   Stub   Connectors   have   one   Female   Connector   attached   to   one   end   and   unterminated   wires on   the   other.   These   are   used   for   a   number   of   applications   that   include   connecting   to   the   JB6PJ   Mini Junction   Box,   Dimmer   Drivers   and   Colour   Temperature   Drivers   as   well   as   Stub   Connections   transitioning from   In-Cabinet/Under-Cabinet   to   Interior   Wall   wiring.   They   are   available   in   2,   3,   and   4   wire   22AWG Jacketed   configurations   for   Single   Colour,   Colour   Temperature   Control   and   RGB   applications   respectively. Available lengths from 24” to 60”. LK-22   Series   Link   Wires   have   one   Female   Connector   on   each   end.   These   are   used   to   Link   one   section   to the   next   when   there   is   a   distance   that   would   make   single   wires   unmanageable.   They   are   available   in   2,   3, and   4   wire   22AWG   Jacketed   configurations   for   Single   Colour,   Colour   Temperature   Control   and   RGB applications respectively. Available lengths from 4” to 60”. JW-22-90   Series   Jumper   Wires   have   one   Female   Connector   on   both   ends   and   are   designed   to   make   90 Degree   Turns.   These   are   used   to   to   Jumper   one   section   to   the   next   in   Inter-Cabinet   applications   where   the sections   will   be   close   together.   These   are   available   in   2   or   4   wire   22AWG   Non-Jacketed   configurations. These   Jumper      Wires   ARE   NOT   POLARIZED   to   avoid   confusion   over   Left   and   Right      turn   ordering terminology.   Ensure   that   your   L.E.D.   Channel   in   installed   in   a   manner   that   all   Connections   are   in   correct alignment.   If   there   is   a   conflict   in   the   Channel   installation,   simply   turn   one   end   180   degrees.   Available lengths from 2” to 8”. JW-22   Series   Jumper   Wires   have   one   Female   Connector   on   both   ends.   These   are   typically   used   when installing   Long   Run   L.E.D.   Channel   installations   where   the   overall   length   exceeds   120”.   They   are   available in   2,   3,   and   4   wire   22AWG   Non-Jacketed   configurations   for   Single   Colour,   Colour   Temperature   Control   and RGB applications respectively. Available lengths from 2” to 8”.
1).
2).
3).
4).
5).
6).
Click on an image to enlarge.
PS12V3A
PS12V6A
MW12V5AIP67
JB6PJ
A Complete List of Part Numbers Below
Controller Driver Controller Driver Controller Driver Controller Remote Controller Remote Lighting Products Power Supply Power Supply Power Supply Power Supply Power Supply Power Supply Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories Wiring & Accessories
CD-01 CD-02 CD-04 CR-CCT CR-RGBW IG3W PS12V3A PS12V6A PS12V3A-D PS12V5A-D PS12V8A-D MW12V5AIP67 DS-1 JB6PJ JW22-2 JW22-2-90 JW22-3 JW22-4 JW22-4-90 LK22-2 LK22-3 LK22-4 ST22-2 ST22-3 ST22-4
Dimmer Driver WW/CW Driver CCT RGBW Driver Universal Remote RGBW Remote In Ground Light 3W 60 12V@3A Indoor Class2 12V@6A Indoor Class2 12V@3A Indoor Dimmable 12V@5A Indoor Dimmable 12V@8A Indoor Dimmable 12V@5A Outdoor IP67 Class2 Magnetic Door Switch Junction Box 6 ckt /w Jack Joining Wire 2 X 22AWG Joining Wire 2 X 22AWG 90 Joining Wire 3 X 22AWG Joining Wire 4 X 22AWG Joining Wire 4 X 22AWG  90 Link Wire 2 X 22AWG Link Wire 3 X 22AWG Link Wire 4 X 22AWG Stub Wire 2 X 22AWG Stub Wire 3 X 22AWG Stub Wire 4 X 22AWG
PS12V3A
768
Taylor Electric Light Company